Headphone & Microphone Test

Check left/right channels, balance and your microphone in seconds.

Stereo test

Start with your volume turned down.

 

Microphone test

What the headphone and microphone test checks

Making sure your headset and microphone work before a call or a match only takes a few seconds. This tool runs directly in your browser, with nothing to install, and lets you check:

  • Left and right channels: a tone plays from the left only, the right only, or both. You will immediately notice if your headphones are on backwards or one side has failed.
  • Frequency sweep (20 Hz – 20 kHz): the tone rises from the lowest pitch humans can hear to the highest. Listening for where the sound fades shows the limits of both your headphones and your hearing.
  • Microphone level meter: shows whether the input moves when you speak, and how strong the signal is.
  • 5-second record and playback: record your voice and play it back right away to hear what others hear.

Before you start

Turn your system volume down before you begin and raise it gradually. The high end of the sweep in particular can be unpleasant at full volume. For the microphone test, your browser will ask for permission; the microphone is not accessed unless you allow it. If you have several input devices, pick the one you want to test from the device list.

All sounds are generated in your browser, and the recording is kept only in your device's memory. Nothing is uploaded to any server, and the recording is gone once you close the page.

Interpreting the results

Headphones

  • If the left-channel tone comes from the right, your headphones are on the wrong way round or the channels are swapped in your operating system.
  • If one side is quieter, check the balance setting in your sound settings; if that does not help, the cable or driver may be faulty.
  • Not hearing the very lowest frequencies is normal on small earbuds. Not hearing above about 15 kHz is a natural part of ageing.
  • Crackling or buzzing at a specific point in the sweep can mean a damaged driver.

Microphone

  • If the meter does not move at all, the wrong device may be selected, the mic may be muted, or the operating system may be blocking access.
  • If the meter hits the top during normal speech, the gain is too high and your voice will sound distorted to others.
  • If the recording has a hum or fan noise, move the mic closer to your mouth and try noise suppression features.

Audio problem or connection problem?

If people say your voice cuts out or sounds robotic in calls, check your microphone here first. If the recording sounds clean, the problem is most likely your internet connection rather than your hardware. Voice traffic never resends lost packets, so it is very sensitive to jitter and packet loss. In that case, run the packet loss test; the MOS score in its report directly estimates voice call quality. If the trouble is in-game voice chat, you can also check your latency to the server regions with the Valorant or League of Legends ping tests.

Tools